Pin Shin Machinery Co., Ltd

BED

one-piece bed is made of high compressive strength cast iron, high rigidity and stability for high precision machining.
removable gap bed.
bedways and slideways are harden and precision ground.
slideways are coated with Turcite B to ensure smooth movement and minimum wear.

HEADSTOCK

all gears in headstock are made of chromium molybdenum steel,(SCM-21) with harden and precision ground.
spindle supported at 3 pointed by precision taper roller bearings.
forced lubricated to all gears and bearings.

GEAR BOX

universal gear box for inch,metric,MD and PD threading without change gears.

APRON

4-way rapid traverse by the joystick, more convenient and efficient for operators.
overload safety device is equipped to avoid machine damage.
manual & automatic lubrication for bedways & slideways.

HR Series	HR-680	HR-780	HR-880	HR-980
CAPACITY
Swing over bed	680mm(26 7/8")	780mm(30 7/8")	880mm(34 3/4")	980mm(38 3/4")
Swing over cross slide	440mm(17 3/8")	540mm(21 1/4")	640mm(25 1/4")	740mm(29 1/8")
Swing over gap	970mm(38 1/8")	1070mm(42 1/8")	1170mm(46")	1270mm(50")
Width of gap	482mm(19")	482mm(19")	482mm(19")	482mm(19")
Distance between centers	1100~8000mm(43"~315")	1100~8000mm(43"~315")	1100~8000mm(43"~315")	1100~8000mm(43"~315")
Height of center (over bed)	340mm(13 3/8")	390mm(15 3/8")	440mm(17 3/8")	490mm(19 1/4")
Bed width	458mm(18")	458mm(18")	458mm(18")	458mm(18")
HEADSTOCK
Spindle nose	A2-11/D1-11	A2-11/D1-11	A2-11/D1-11	A2-11/D1-11
Spindle bore	105mm(4 1/8")/155mm(6")-OPT	105mm(4 1/8")/155mm(6")-OPT	105mm(4 1/8")/155mm(6")-OPT	105mm(4 1/8")/155mm(6")-OPT
Number of spindle speed	12	12	12	12
Range of spindle speed	15~1000rpm/14~800rpm(Ø155mm)	15~1000rpm/14~800rpm(Ø155mm)	15~1000rpm/14~800rpm(Ø155mm)	15~1000rpm/14~800rpm(Ø155mm)
FEEDS-THREAD
Lead screw diameter	45mm	45mm	45mm	45mm
Leasd screw pitch	2TPI / 12mm	2TPI / 12mm	2TPI / 12mm	2TPI / 12mm
Number of feed changes	28	28	28	28
Longitudinal feed-mm/rev(in.rev)	0.05(0.002")~0.7(0.027")	0.05(0.002")~0.7(0.027")	0.05(0.002")~0.7(0.027")	0.05(0.002")~0.7(0.027")
Cross feed -mm/rev(in.rev)	0.025(0.001")~0.35(0.014")	0.025(0.001")~0.35(0.014")	0.025(0.001")~0.35(0.014")	0.025(0.001")~0.35(0.014")
Inch threads	2~28(36)	2~28(36)	2~28(36)	2~28(36)
Metric threads	0.8~14(65)	0.8~14(65)	0.8~14(65)	0.8~14(65)
D.P no./range	4~56(36)	4~56(36)	4~56(36)	4~56(36)
Module pitch no./range	0.5~7(22)	0.5~7(22)	0.5~7(22)	0.5~7(22)
TOOL SLIDE
Cross slide travel	390mm(15 3/8")	390mm(15 3/8")	390mm(15 3/8")	520mm(20 1/2")
Compound rest travel	240mm(9 1/2")	240mm(9 1/2")	240mm(9 1/2")	240mm(9 1/2")
TAILSTOCK
Quill travel	210mm(8 1/4")	210mm(8 1/4")	210mm(8 1/4")	210mm(8 1/4")
Quill diameter	105mm(4 1/8")	105mm(4 1/8")	105mm(4 1/8")	105mm(4 1/8")
Inner taper of quill	MT6	MT6	MT6	MT6
MOTOR
Main motor	15HPX4P / 20HPX4P-OPT	15HPX4P / 20HPX4P-OPT	15HPX4P / 20HPX4P-OPT	15HPX4P / 20HPX4P-OPT
Rapid feed motor	1/4 HP	1/4 HP	1/4 HP	1/4 HP
Coolant pump	1/8 HP	1/8 HP	1/8 HP	1/8 HP
Machine dimension
Length/mm(in)	1100G-2750(108");1600G-3250(128")	2000G-3750(148");3000G-4750(187")	4000G-5750(227");5000G-6750(266")	6000G-7750(305") ;8000G-9780(385")
Width/mm(in)	1300(51 1/8")	1300(51 1/8")	1300(51 1/8")	1300(51 1/8")
Height/mm(in)	1350(53 1/8")	1400(55 1/8")	1450(57 1/8")	1500(59 1/8")
N.W/kg	1100G-3300;1600G-3600 2000G-3900;3000G-4500 4000G-5100;5000G-6300 6000G-7000;8000G-8400	1100G-3400;1600G-3700 2000G-4000;3000G-4600 4000G-5200;5000G-6400 6000G-7100;8000G-8500	1100G-3500;1600G-3800 2000G-4100;3000G-4700 4000G-5300;5000G-6500 6000G-7200;8000G-8600	1100G-3600;1600G-3900 2000G-4200;3000G-4800 4000G-5400;5000G-6600 6000G-7300;8000G-8700
Packing dimension
Length/mm(in)	1100G-2900(115");1600G-3400(134")	2000G-3900(154");3000G-4900(193")	4000G-5900(232");5000G-6900(272")	6000G-7900(311");8000G-9900(390")
Width/mm(in)	1660(65 3/8")	1660(65 3/8")	1660(65 3/8")	1810(71 1/4")
Height/mm(in)	1550(61")	1600(63")	1650(65")	1700(67")
G.W/kg	1100G-3450;1600G-3800 2000G-4150;3000G-4850 4000G-5600;5000G-7000 6000G-7700;8000G-9200	1100G-3550;1600G-3900 2000G-4250;3000G-4950 4000G-5700;5000G-7100 6000G-7800;8000G-9300	1100G-3650;1600G-4000 2000G-4350;3000G-5050 4000G-5800;5000G-7200 6000G-7900;8000G-9400	1100G-3750;1600G-4100 2000G-4450;3000G-5150 4000G-5900;5000G-7300 6000G-8000;8000G-9500

STANDARD ACCESSORIES
Center sleeve	1 pc
Dead center MT5& MT6	1 pc
Coolant pump	1set
Work light	1 pc
Tool box &tool	1 set
Steady Rest Ø280mm(11")	1 pc
4 ways rapid traverse device	1 set

OPTION ACCESSORIES
12"/15" 3-jaw scroll chuck	1 pc
15"/20" 4-jaw independent chuck	1 pc
Taper turning attachment	1 pc
Follow rest	1 pc
Face plate	1 pc
Steady rest Ø420mm(16")	1 pc
Steady rest Ø560mm(22")	1 pc
Rear splash guard	1 pc
Rear adapter plate	1 pc
Electromagnetic brake	1PC

BACK +

Product

HR-Heavy Duty Lathe Machine

Description